سیستم اعلام حریق آنالوگ مدل CF3000

توضيح فارسي : The Cooper Fire CF3000 panel is a high-specification, analogue fire detection panel which is available in
a 1, 2 or 4-loop configuration. It combines sophisticated functionality yet simple operation with a very
aesthetically-pleasing design.
The large capacity, ability to support complex cause and effect programming and wide range of user
controllable functions make the panels suitable for a wide range of projects from sheltered housing to large
office developments as well as many industrial applications.
The panel uses soft addressing to minimize installation time and remove the potential for error associated
with manual addressing.
All of the CF3000 fire detection system components have been specifically designed to operate as part
of an integrated system; this provides an assurance that the panel, sensors, interfaces and other ancillaries
are all fully compatible with each other and that the full range of system functionality is supported by
each device.
• LPCB 3rd party approved to EN54 pts. 2 and 4
• Choice of 1, 2 and 4-loop panel options
• Large multi-functional touch screen
• Spur-tolerant soft addressing
• Short circuit isolators incorporated into each loop device
• Up to 200 addresses per loop
• Fully network capable up to 127 panels
• Network compatible with CF1000 and CF2000 range
of panels
• Optional integral printer
------------------------
CF3000 and CF1000 Range User Interface
- The main element of the user interface is a large
(120mm x 90mm visible area) touch screen display,
which provides comprehensive user information as well
as acting as a multifunctional keypad providing clear
and precise user controls and system information
- Comprehensive ‘help’ information is provided throughout
the menus to assist end users/system operators
unfamiliar with the panel operation
- To provide fast, simple text changes within the system,
the touch screen display reconfigures to a full QWERTY
keyboard when certain text functions are selected
(for example, if the change device text menu option
is selected)
- As well as a large format LCD display providing full
system status information, the panel incorporates 96
(CF3000 range) or 16 (CF1000 range) zone indication
LEDs to provide information on the status and spread
of any fire, even to a user who is completely unfamiliar
with the system. In addition there are a number of
system status LEDs designed to give clear indication
of the panel and system condition
-------------------------------------------
Printer (Optional on CF3000 range)
- Access to printer, when fitted, is via a separate locked
access door. Paper can be changed by non skilled
engineer without exposure to any live components
- The printer can either be set to print on demand or to
automatically print all system events as they occur
Detection Capacity
- Up to 200 addresses per loop can be installed, which
can be a mixture of call points, detectors, interfaces or
loop sounders. It should be noted that, to comply with
EN54 requirements, no more than 512 addresses should
be connected to a single panel
Alarm Capacity
- Up to 70 loop-powered sounders, beacons or output
interfaces per loop
- 3 stages of cause-and-effect programming per
output device
- The panels have four alarm line outputs with
a maximum load of 1.5A
- Additional conventional sounders can be connected
using the loop-mounted alarm line extender unit
Access Modes
- The Cooper range of analogue panels has 3 modes
of user operation:
- Normal
- End user
- Engineer
- End user mode allows access to system test functions,
enable and disable menus, view analogue level menus
and functions such as evacuate, silence alarms and reset
- Engineer mode allows alteration of system configuration
and programming of site specific data such as device
text and sounder programming. This mode also allows
the adding and removal of devices and alteration of
existing text
System Functionality
- The Cooper Fire range of analogue panels are designed
to ensure simplicity of future expansion. If an additional
device is added after the system has been programmed,
the panel will allocate the next available address; it will
not alter any of the existing address number allocation
thus enabling simple updating of as per fitted drawings
etc. Similarly if a device is removed, the relevant
address is saved as a spare address for future use, and
the addresses of the remaining devices are not affected
- All devices are soft addressed during commissioning.
However once allocated, addresses are locked until
manually altered, thus enabling simple system additions
and deletions without affecting other addresses
- In the event of an external short-circuit occurring, panel
short circuit isolators on the devices nearest to each side
of the short-circuit open, thus isolating the fault yet
maintaining full system integrity
- Under short-circuit fault condition, the panel drives
communication from both ends of the loop thus
maintaining full communication with all devices
----------------------------------
Analogue addressable
fire detection panels
System Functionality Cont:-
- Day/night mode override via timer or external
switched signal
- Monitored output to fire routing equipment
- Monitored output to fire protection equipment
- Monitored output to fault monitoring equipment
- Multiple programmable remote inputs (up to 180
per panel) can be set for:
- Override of day/night mode setting
- Photo-thermal sensors go to thermal only
- Rate-of-rise sensors go to fixed high
temperature mode
- High temperature heat sensors go
to rate-of-rise mode
- Disablement of pre-assigned group
of addresses
- Class change
- Non latching zone input
- Evacuate
Interface Options
- Zone monitor units can be used to connect zones
of suitable conventional detectors or loop-powered
beam detectors
- Sounder circuit controllers can be used to provide
additional conventional sounder circuits without wiring
back to main panel
- Mains rated single input / output unit
- 3-channel, 24V rated, input / output unit
- Spur isolator - allows a spur of analogue
addressable devices from loop
- Shop unit monitor allows the connection of a
conventional detection zone along with 2 conventional
sounder circuits, ideal for linking small self contained
units onto a main addressable panel.
(Requires a 24VDC power supply)
Repeater Panel
There are 2 repeater panels available: the CF3000PRG
for loop connection and the CF3000PRGNC for network
connection.
If loop-connected, the panel provides information from the
local panel. If network-connected, the panel provides full
system network information.
----------------------------------------
Repeater Panel
The CF3000PRG repeater panel can be either surface
or semi-flush mounting and provides both system
information and the following system control:
- Silence alarm
- Evacuate
- Reset
---------------------------------------
Analogue sensors
A comprehensive range of analogue sensors are
available to operate with the Cooper Fire analogue
addressable panel range with the following features:-
• Stylish low profile design
• 360º viewable LED design
• Removable detector chamber
------------------------------------
Analogue sensors
A comprehensive range of analogue sensors are
available to operate with the Cooper Fire analogue
addressable panel range with the following features:-
• Stylish low profile design
• 360º viewable LED design
• Removable detector chamber
-------------------------------------------
The Cooper Fire range of addressable callpoints are
available as surface, flush and weatherproof versions.
All callpoints have integral short circuit isolators and
have a status LED fitted as standard. To simplify
replacement of glass element, callpoints are fitted with
fast fit, clip-on front covers.
--------------------------------------
Base Sounder
The CAS380 is a loop-powered integrated sounder and
sensor mounting base. It can be used with any analogue
sensor or as a standalone sounder with the optional
CASC cover plate.
Wall Sounder
The CAS381 range of loop-powered addressable wall
sounders offers a highly efficient, low current sounder
option. Sounder volume and tone are set at the analogue
panel avoiding the need to access each sounder
individually to alter settings.
--------------------------------
Base Sounder / Beacon
The CASBB384 is a loop-powered, integrated
sounder/beacon and sensor mounting base. It can be used
with any analogue sensor or as a standalone sounder with
the optional CASC cover plate.
Wall Sounder Beacons
The Cooper Fire range of loop-powered addressable
wall-mounted sounder beacons offer a highly efficient,
low current sounder beacon option. Sounder volume and
tone are set at the analogue panel avoiding the need to
access each sounder individually to alter settings.
---------------------------------------------------------------
LED Beacon
The CAB382 loop-powered addressable beacon offers high efficiency LED
technology together with a low profile design for a discreet installation.
The beacon is designed to provide a visual indication in areas of high
ambient noise, or where people may be hard of hearing.
--------------------------------------
Interfaces
An extensive range of interfaces are available
for the Cooper Fire range of analogue panels
providing solutions for most design requirements.

قيمت ها:

قیمت مصرف کننده   ریال

قیمت   ریال